Cobra Transportation Services has the following equipment at our disposal:

* Large fleet of air ride equipped tandem axle tractors.
* Large fleet of standard 20-40-45 Chassis.
* Cobra owns numerous Goose Neck Chassis.
* Huge lot of Anysizer Chassis, which have the ability to haul the heaviest of loads.
* Cobra owns our own container lift, enabling us to move containers throughout with a weight of #20,000 or less.
* Cobra also owns and utilizes a mobile repair truck, allowing us to make the most difficult problems on the road end seamlessly by fixing the problem in a timely manner.

Cheetah Chassis Information

Function: Carries one 40 ft ISO Container Meets all DOT, TOFC, AAR, FMVSS, ANSI, SAE and TTMA specifications in effect at the time of chassis manufacture and applicable to operation in the United States.

Overall Chassis Length: 40ft. 6in.

Overall Chassis Width: 96 inches

Tandem Location: 54 inches

Kingpin Location: 30½ inches from rear face of front bolster.

Maximum Rear Height: 48 in.

Main Frame Width: 40 in.

Main Beams: Wide flange I-Beam 12 inch deep, 19 lb/ft, hot rolled steel, ASTM A572-50

Gooseneck Beams: 5 inches deep I-Beam, fabricated with ½ inch x 4-inch flanges and ¼ inch x 4 inch web

Cross Member: All cross members are formed from 10-gauge steel

Upper Coupler Assembly: Pick up plate is 5/16" thick and extends approximately 18" behind the kingpin and is reinforced fore and aft by ¼ inch formed channels

Front Bolster: ¼ inch thick channel 9 inches high x 6 inches deep with 10 gauge stiffeners

Rear Bolster: Box type with 3/8 inch x 8 inch top plate and ¼ inch thick, formed channel lower member with ICC light holes. A small license plate bracket will be mounted on the under side.

Twist Lock & Slide: Pins Meets ISO standards and requirements.

ICC Bumper: 4 inch x 4inch x 3/16 inch Tube step bumper. Main beam and bumper struts are extended 2 inches to protect rear bolster. (No rubber dock bumpers)

Landing Gear: Jost two speed AAR approved, square leg. 50,000 lb. lift capacity and 140,000 static load capacity.

Landing Gear Axle Type: Standard

Landing Gear Foot Group: 10 in. by 10 in. Low profile sandshoe

GVWR: 65,000 lbs

Weight Approximately: 6,500 lbs. + 2%

 

Chief Anysizer Chassis Information

DIMENSIONS
Overall Length Extended . . . . . . . . . . . . . . . . . .45' - 10"
Overall Length Retracted . . . . . . . . . . . . . . . . . .33' - 0"
Overall Width . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .96"
Twistlock Face Height . . . . . . . . . . . . . . . . . . . . . . . .48"
5th-Wheel Height . . . . . . . . . . . . . . . . . . . . . . . . . . . .48"
Kingpin Setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . .25"

WEIGHTS
Tare Weight . . . . . . . . . . . . . . . . . . . . . . . .9,995 lbs.±3%
GVWR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .69,640 lbs.
GAWR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20.000 lbs.
AXLES
Quantity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2 each
Lubrication . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Oil
Wall Thickness . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1/2"
Track Width . . . . . . . . . . . . . . . . . . . . . . . . . . . . .71-1/2"

BRAKES
Type of ABS . . . . . . . . . . . . . . . . . . . . . . . .Wabco 2S/2M
Brake Size . . . . . . . . . . . . . . . . . . . . . . . . . .16-1/2" x 7"
Spring Brake Air Chamber Size . . . . . . . . . . . . . .30"- 30"
Individual Test Report . . . . . . . . .Documentation Provided

SUSPENSION
Manufacturer and Model . . . . . . . . . . . .Hutch H-9700US
Spread/Type . . . . . . . . . . . . . .9'-1" Wide Spread Tandem
Springs and Rating . . . . . . . . . . . 3 Leaf H.D.@24,000 lbs

TIRES
Size . . . . . . . . . . . . . . . . . . . . . . . . . . .255/70R22.5 LRH

RIMS
Type . . . . . . . . . . . . .Aluminum DuraBrite Unimount 10 Hub Pilot
Size . . . . . . . . . . . . . . . . . . . . . . . . . . . .8.25" x 22.5"

LANDING GEAR
Manufacturer and Model . . . . .Binkley Contender 51,000
Travel Distance . . . . . . . . . . . . . . . . . . . . . . . . . . .17"
Shoe Type . . . . . . . . . . . . . . . . . . . . .10" x 12" x 4-1/2